Bercomac 700968-1-33V, Руководство пользователя

Страница: 14 / 60

Assembly and initial set-up
12
8. Install the battery support with wiring (700524)
IMPORTANT : The control box is equipped with a red
emergency stop button if needed to stop the engine
quickly.
NOTE : The emergency switch must be pulled out to
start the accessory engine.
9. Connect the connector to the deflector motor (item
1).
10. Make sure to insert the connectors together and
attach the wire connected to the deflector motor
with a nylon tie wrap (item 2) as illustrated. Cut off
the excess nylon tie wrap.
CAUTION : Make sure that the wire is long enough to
allow full rotation of the chute and that no wire gets
caught or comes in contact with the muffler.
Assembly of options
See with your dealer for an up-to-date list of options.
Head light kit #700456
See the instructions that come with the kit.
Snow drift cutter kit #700535
See the instructions that come with the kit.
Initial setting
Make sure to arrange the wires from the control box on
the loader arms to the operator's station. Secure them
securely. Do this after hooking the accessory on the
vehicle (see section hook-up and unhook).
1
2