Bercomac 700968-1-33V, Руководство пользователя

Страница: 25 / 60

Troubleshooting
23
PROBLEM POSSIBLE CAUSES CORRECTIVE ACTION
Frozen motor or chute. Slap the chute or wiggle from side to
side.
Defective control box or broken
wire harness. Replace control box or wire harness.
Loose connectors or oxidation on
connectors or motor. Retighten or clean connectors. Or
replace connectors.
Electric clutch slips
Insufficient electrical current. Recharge snowblower ’s battery.
Electrical current is cut off. Replace damaged wiring.
Clutch basket is contaminated. Clean plates with brake cleaner.
Electric clutch is noisy or vibrates abnormally.
Mounting bolts are loose. Tighten or replace bolts.
Certain clutch components may be
damaged. Repair or replace damaged
components.
** In case wires become disconnected from the relay, refer to the wiring diagram below to reconnect them in their
proper place. **
Orange
Green/Vert
Blue/Bleu
White/Blanc
Red/Rouge
Black/Noir