Bercomac 700968-1-33V, Руководство пользователя

Страница: 10 / 60

Assembly and initial set-up
8
Assembly & initial set-up
Vehicle requirements
The adaptor is designed to attach to tractor loader
equipped with a universal quick attach
•
Hitch type: Tractor Loader Universal Quick Attach
(skid steer quick attach type)
•
Maximum vehicle weight: 4000lbs
•
Tractor type : agricultural tractor
•
Loader minimum lift capacity at full height at pivot
pin (C) is 1500
lbs. If length L is less than 40’’, contact
us for calculation.
WARNING
To avoid serious injury or death:
Counterweight may be required. Refer to your loader and
tractor manual to determine if counterweight is needed.
If loader and tractor manual do not have enough
information, contact your tractor/loader manufacturer to
determine if you need counterweight
WARNING
To avoid serious injury or death caused by vehicle
overturn:
Operate only with tractor equipped with an approved
rollover-protective structure (ROPS) or ROPS cab and
seat belt. Foldable ROPS must be kept up and in locked
position at all times. Fasten seatbelt snuggly and
securely.
Reception
WARNING
THIS ACCESSORY AND ALL OPTIONS ARE HEAVY!
To avoid risk of strain injury, NEVER lift the accessory or
any options by hand alone when handling the components
or assembly. Use proper lifting device and seek assistance.
When accessory is off the ground, NEVER be underneath
the accessory. Serious injury including possibility of death
could occur if accessory were to drop suddenly.
Always wear protective shoes and appropriate gloves
when manipulating or using this equipment.
1. Remove the protective wrapper from the
shipping wooden box.
2. Disassemble the wooden box.
3. Unbolt the accessory by removing all the
fasteners that hold it in place in the wooden
box.
4. Using a winch, forklift or other lifting device,
attach a chain to each of the 2 holes on the top
of the hitch (item A) and slightly lift the rear of
the accessory.
5. Place a jack stand under the engine in the
location indicated to securely block the
snowblower, taking care not to crush any
electrical wire (the hitch is hidden in the
following image to better show the location).
A
A