Take the Handlebar (5) and fix into place using 2 x M8 x
20mm Coated Allen Bolts (19) and 2 x M8 Flat Washers (50).
Make sure you slide the Pulse Cable (2) over the Computer Bracket.
Tighten fully.
Remove the 4 pre-fitted screws (73) and 4 pre-fitted Washers (74)
from the back of the Computer. Now plug the Upper Computer Link
Cable (65) into the back of the Computer (1). Now sit the Computer
(1) onto its bracket and secure in place using the 4 x screws (73)
and 4 x Washers (74) previously removed. Now fit the Pulse plug
(2) into the back of the Computer (1). Now, your machine is ready
for use.
6
2
5
19
50
1
74
73
Assembly & Adjustments
Page
21
07MME
Manual Magnetic Elliptical Trainer
Содержание 07MME
Страница 2: ......
