USER MANUAL
KYO100-KYO300
19
Disarm (Turning OFF your system)
This operation will Disarm all the Partitions common to
both the Digital Key/Card and Reader in use.
To Disarm the System (all LEDs OFF):
1.
Insert the SAT Key into the ECLIPSE Reader, or hold
the proximity Key/Card near the sensitive field of the
PROXI Reader — until all the LEDs turn OFF (see
Figure 3a).
2.
Remove the Key/Card to Disarm the System.
Arm — Global Mode (Turning ON your system)
This operation will Arm all the Partitions common to both
the Digital Key/Card and Reader in use.
To Arm the System in
Global Mode
(Red LED ON):
1.
Insert the SAT Key into the ECLIPSE Reader, or hold
the proximity Key/Card near the sensitive field of the
PROXI Reader — until the Red LED turns ON (see
Figure 3b).
2.
Remove the Key/Card to Arm the System in Global
Mode.
Arm — A Mode
This operation will Arm or Disarm the Partitions in ac-
cordance with the
A Mode
Arming configuration (pro-
grammed by the Installer).
To Arm the System in
A Mode
(Amber LED ON):
From ECLIPSE Readers
1a.
From Disarmed status (Red LED OFF): insert the
SAT Key into the ECLIPSE Reader — the Red LED
will turn ON (see Figure 3b).
2a.
Push the Key once against the switch inside the
Reader. The Red LED will turn OFF and the Amber
LED will turn ON (see Figure 3c).
3a.
Remove the Key. As you remove the Key the Red
LED will turn ON and the System will Arm in
A Mode
.
From PROXI Readers
1b.
Hold the Proximity Key/Card near the sensitive field
of the PROXI Reader. The LEDs will light in turn (at 2
second intervals).
Fig. 4 - Disarm/Arm/Stop Alarms FROM ECLIPSE Readers
2b.
Remove the Key/Card when the Amber LED turns
ON. At this point, the Red LED will also turn ON and
the System will Arm in
A Mode
.
Arm — B Mode
This operation will Arm or Disarm the Partitions in ac-
cordance with the
B Mode
Arming configuration (pro-
grammed by the Installer).
To Arm the System in
B Mode
(Green LED ON):
From ECLIPSE Readers
1a.
From Disarmed status (Red LED OFF): insert the
SAT Key into the ECLIPSE Reader — the Red LED
will turn ON (see Figure 3b).
2a.
Push the Key twice against the switch inside the
Reader. The Green LED will turn ON (see Figure 3d).
3a.
Remove the Key. As you remove the Key the Red
LED will also turn ON and the System will Arm in
B
Mode
.
From PROXI Readers
1b.
Hold the Proximity Key/Card near the sensitive field
of the PROXI Reader. The LEDs will light in turn (at 2
second intervals).
2b.
Remove the Key/Card when the Green LED turns ON.
At this point, the Red LED will also turn ON and the
System will Arm in
B Mode
.
Stop Alarms
(for ECLIPSE Readers ONLY)
To Stop Alarms: insert a SAT Key into an ECLIPSE
Reader (see Figure 4e).
The outcome of this operation depends on how the In-
staller has programmed the SAT Key.
If the SAT Key has been duly programmed, this opera-
tion can:
Stop Partition Alarms
generated by Partitions common
to the SAT Key and ECLIPSE Reader in use, and/or
Stop Control panel Alarms
and/or
Clear the Call Queue
(end the ongoing call, and inhibit
further Alarm calls).
When the SAT Key is inserted into the Reader, the Red
LED will switch status, and the Amber and Green LEDs
will turn OFF.
Содержание KYO 100
Страница 1: ......
