USER MANUAL
KYO100-KYO300
17
USING DIGITAL KEYS AND CARDS
The Digital Keys/Cards will allow you to perform all the
basic operations from enabled Readers.
Readers
Readers have 3 System status LEDs (Red, Green and
Amber).
Readers can also be used to signal three specific
events. Ask your Installer for details.
This Control panel manages:
ECLIPSE Readers
(see Figure 2b) - These devices
accept commands from SAT Keys (Key must inserted
into the key slot on the Reader).
PROXI Proximity Readers
(see Figure 2d) - These
devices accept commands from Digital Keys and
PROXI-CARDS (the Card/Key must be held near the
sensitive field
of the Reader).
Alison/32LP
LED Keypads (see Fig. 3e) - These
Keypads have built in
Proximity Readers
Readers
and accept commands from Digital Keys and PROXI-
CARDS (the Card/Key must be held near the
sensi-
tive field
of the Reader).
KYO 300 manages up to 32 Readers (KYO 100 man-
ages 16 Readers). This Control panel supports up to 32
Readers. The Installer will program the following param-
eters for each Reader:
The Partitions the Reader can control (Reader Parti-
tions)
A Mode Arming (AMBER)
Fig. 3 -
a)
SAT Digital key,
b)
ECLIPSE key reader,
c)
PROXI-CARD,
d)
PROXI reader,
e)
Alison/32LP Keypad.
B Mode Arming (GREEN)
Digital Keys/Cards
This Control panel can manage:
SAT Keys
(see Figure 2a) - These work with
ECLIPSE
and
PROXI
Readers.
PROXI-CARDS
(see Figure 2c) - These work with
PROXI
Readers only.
The section describes how to operate your system from
a Key/Card Reader. Each Key/Card has a random code
— selected from over 4 billion combinations.
Your Installer can assign an Identifier Number and De-
scription to up to 500 Keys/Cards. The number will be
recorded in the Event Logger each time the Key/Card
operates on the System. The Digital Keys/Cards can be
programmed to operate on specific Partitions.
In this Manual, the word Reader refers to ECLIPSE
and PROXI Readers.
The Reader LEDs
The ECLIPSE Key and PROXI Card Readers simplify
system control by replacing User Code PINs with high
Security Digital Keys or Cards. The Readers have 3 LEDs,
this section describes how the LEDs will signal the Sys-
tem status.
No Key/Card at Reader
When no Digital Key/Card is present at the Reader, the
LEDs will signal as shown in Table 8.
Q
'HV
!
"
#
#
$ !
$ #
%
$%"
&
&%'
%#
%(
Содержание KYO 100
Страница 1: ......
