BENSON MH300, Инструкция пользователя

Страница: 4 / 26

1.0 Compliance notices
The Benson MH 300 oil fired Heater detailed
herewith is manufactured by Benson Heating within
a strictly controlled quality environment within the
parameters of ISO 9001.2000
The Benson MH 300 has been tested and assessed
for compliance with the following European
Directives.
Machinery Directive (89/392/EEC)
Low Voltage Directive (73/23/EEC & 93/68/
EEC)
Electromagnetic Compatibility Directive
(89/336/EEC & 91/31/EEC)
Product Liability Directive (65/374/EEC)
The manufacturer has taken reasonable and
practical steps to ensure that Benson MH 300
Heaters are safe and without risk when properly
used. These heaters should therefore only be used
in the manner and purpose for which they were
intended, and in accordance with the
recommendations detailed herewith. The heaters
have been designed, manufactured, assembled,
inspected, and tested, with safety and quality in
mind, there are certain basic precautions which the
installer and user should be aware of, and they are
strongly advised to read the appropriate sections of
the information pack accompanying the heater,
prior to installation or use.
Benson Heating supports all new products being
supplied to their customers with a comprehensive
information pack; this clearly defines mandatory
instructions for the safe installation, use, and
maintenance, of the appliance(s).
Where proprietary items are incorporated into
Benson Heating products, detailed information and
instructions are also provided as part of the
information pack.
It is the responsibility of the installer, owner, user, or
hirer, of such products supplied by Benson Heating
to ensure that they are familiar with the appropriate
information/manuals, supplied by the manufacturer,
and that they are suitably aware of the purpose of
the manuals and the safety instructions. In addition,
operators must be suitably trained in the use of the
appliance so as to ensure its continued safe and
efficient use.
Benson Heating has a commitment to continuous
improvement, and therefore reserves the right to
amend or change the specification of the MH 300
Heater subject to compliance with the appropriate
European, national, and local regulations.
Contained within the text of the manual, the words
'Caution' and 'Warning' are used to highlight
certain points.
Caution is used when failure to follow or implement
the instruction(s) can lead to premature failure or
damage to the heater or its component parts.
Warning is used when failure to heed or implement
the instruction(s) can lead to not only component
damage, but also to a hazardous situation being
created where there is a risk of personal injury.
The Benson MH 300 Oil fired heaters conform to
the following harmonized standards;
BS EN 292 - Part 1 : 1991
Safety of Machinery - Basic Concepts, General
Principles for Design Basic terminology,
methodology
BS EN 292 - Part 2 : 1991
Safety of Machinery - Basic Concepts, General
Principles for Design Technical Principles and
Specifications
BS EN 60204 - Part 1 : 1993
Safety of Machinery - Electrical Equipment for
Machines Specification for General Requirements
BS EN 60335 - Part 1 : 1988
Safety of Household and Similar Electrical
Appliances General Requirements
BS EN 55014 - 1993
Limits and methods of measurement of radio
disturbance characteristics of electrical motor-
operated and thermal appliances for household and
similar purposes, electrical tools and similar electric
apparatus