Bender TM800, Руководство пользователя, Страница: 66 / 92

Menu mode: Operation and setting
66 TM800_D00165_00_M_XXEN/06.2015
8.4.4.12 Settings menu 12: Password
Change, activate/deactivate password.
1. Exit Back to the main menu
2. Password Change password. Factory setting: 807
3. Status: Activate or deactivate password protection.
8.4.4.13 Settings menu 13: Service menu
Only Bender service personnel are authorised to make settings in the Service menu. Access to this
menu is possible only when the correct password is entered.
In the Service menu, information about the device status can be called up and settings for specific
operating conditions can be made.
Device fail-
ure Relay switches as soon as the TM800 recognises a
device failure
Test Relay switches for approx. 1 seconds once a test has
been started via the "TEST" button on the assigned
devices (insulation monitoring devices, LIM, GFCI).
Buzzer The relay switches as soon as the buzzer sounds. Also
other signalling devices can be installed to indicate
pending messages on the TM800.
Some menus are password-protected. Password protection is only effective if the
password has been enabled (switched on).
When an attempt is made to open one of these menus, the password entry
screen display appears automatically:
Once a valid password has been entered, full access will be given to all menus
(except the Service menu) until menu mode is exited.
Setting Description
1.Exit
2.Password: X X X
3.Status: Off
Please enter
Password
0 0 0