Bender TM800, Руководство пользователя, Страница: 10 / 92

Safety instructions
10 TM800_D00165_00_M_XXEN/06.2015
Bender devices:
– As intended
– In perfect working order
– In compliance with the accident prevention regulations and guidelines applicable at the
location of use

Eliminate all faults immediately which may endanger safety.

Do not make any unauthorised changes and only use replacement parts and optional accesso-
ries purchased from or recommended by the manufacturer of the devices. Failure to observe
this requirement can result in fire, electric shock and injury.

Reference signs must always be clearly legible. Replace damaged or illegible signs immediately.

Make sure that the dimensions of the BSV (battery-supported safety power supply), the genera-
tor set and the whole wiring are adequate. The applicable national and international standards
must be observed here. Only in this way selective operation of safety devices can be achieved
and a high degree of safety in case of overload and short circuit can be ensured.
2.4 Delivery conditions, warranty and liability
The conditions of sale and delivery set out by Bender apply. Conditions of sale and delivery can be
obtained from Bender in printed or electronic format.