Bender FTC470XDP, Руководство пользователя

Страница: 57 / 80

57 FTC470XDP_D00111_00_M_XXEN/02.2015
7. Programming examples
Necessary configuration data for the PRODFIBUS DP are to be communicated to the PROFIBUS-Mas-
ter by means of gsd file ftc_1003.gsd before the program is executed. You can load the current file
under the following address:
http://www.bender-de.com
=> Download/Software
7.1 Alarm messages
7.1.1 Number of alarm messages
The PROFIBUS DP Master addresses BMS address 3, the EDS470-12 insulation fault evaluator, re-
questing the current number of its alarm messages.
PROFIBUS Master output data:
The addressed EDS470-12 returns 4 alarm messages:
PROFIBUS Master input data:
The PROFIBUS DP Master addresses BMS address 5, the insulation monitoring device 107TD47, re-
questing the current number of alarm messages.
PROFIBUS Master output data:
The addressed 107TD47 provides 3 stored alarm messages which had been released by pressing the
internal test button of the device.
PROFIBUS Master input data:
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
Consecutive
PROFIBUS ID
No.
always
"0"
BMS address of
the addressed
device
BMS channel
number
BMS
Com-
mand
BMS data
type
High byte
BMS data
value
Low byte
BMS data
value
1 0 3 0 1 0 0 0
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
1 0 3 0 1 1 0 4
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
Consecutive
PROFIBUS ID
No.
always
"0"
BMS address of
the addressed
device
BMS channel
number
BMS
Com-
mand
BMS data
type
High byte
BMS data
value
Low byte
BMS data
value
2 0 5 0 1 0 0 0
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8
2 0 5 0 1 3 0 3