Bender FTC470XDP, Руководство пользователя

Страница: 33 / 80

Function
33 FTC470XDP_D00111_00_M_XXEN/02.2015
6.4.2 Requesting operating messages via the channel number
Writing to FTC470XDP (= output of the PROFIBUS Master)
Table 6.7: Master request: requesting the operating messages via the channel number
Reading from FTC470XDP (= input data of the PROFIBUS Master)
Function
Devices
Channel
No.
BMS
command
Data
Type Data
Value
Requesting for operating messages or information
about the channel number
All
channel
No.
4 0 0
No operating messages (e.g. because of alarms) All
channel
No.
4 1 0
Relay not connected SMO… 1… 12 4 3 0
Relay connected SMO… 1… 12 4 3 1
Line 1 ready for operation ** PRC487 1, 2 4 13 201
Line 2 ready for operation ** PRC487 1, 2 4 13 202
Switching element 1 is switched on PRC487 3 4 13 203
Switching element 2 is switched on PRC487 4 4 13 204
Insulation of the main Op light ok 107TD47 8 4 13 205
Switchover system in automatic mode PRC487 5 4 13 206
Switchover system in manual mode PRC487 6 4 13 207
Line AV ready for operation ** PRC487 1, 2 4 13 210
Line SV ready for operation ** PRC487 1, 2 4 13 211
Line ZSV ready for operation ** PRC487 1, 2 4 13 212
Channel is switched off
RCMS46x/
49x
EDS46x/
49x
1… 12 4 13 213
Switching back interlocking function active ATiCS 4 4 13 214
Phase sequence right ATiCS 30 4 13 215
Switching element position 0 ATiCS 3 4 13 216
BSV line ready for operation ATiCS 1, 2 4 13 217
Channel is switched off
RCMS470
EDS470
1… 12 4 21 0
No CT connected. Input open RCMS470 1… 12 4 22 0
Input is short-circuited RCMS470 1… 12 4 23 0
Prewarning overcurrent in [A]
RCMS460/
RCMS490-
D4
CMS460
9…12
1…12
4 37 value
Prewarning overcurrent in [mA]
RCMS460/
RCMS490-
D4
CMS460
9…12
1…12
4 38 value
Overcurrent < as value in [mA]
RCMS460/
RCMS490-
D4
CMS460
9…12
1…12
4 39 value
Overcurrent > as value in [mA]
RCMS460/
RCMS490-
D4
CMS460
9…12
1…12
4 40 value
Overcurrent in mA 4 41 value