Bender FTC470XDP, Руководство пользователя

Страница: 55 / 80

Function
55 FTC470XDP_D00111_00_M_XXEN/02.2015
6.10 Control commands to be used in the BMS Slave mode
6.10.1 Starting and stopping EDS systems
Writing to FTC470XDP (= output of the PROFIBUS Master):
Table 6.71: Master request: BMS Master is intended to control the EDS system
* The value "address" consists of :
"Address" = (BMS address x 100) + channel number
Reading from FTC470XDP (= input data of the PROFIBUS Master):
Table 6.72: FTC reply to: BMS Master is intended to control the EDS system
Function
Devices
Channel
No.
BMS
comma
nd
Data
Type Data
Value
Command to BMS Master to start insulation fault loca-
tion of an EDS system
0 115 3 0
Command to BMS Master to stop insulation fault loca-
tion of an EDS system
0 115 4 0
Command to BMS Master to start insulation fault loca-
tion of an EDS system in POSITION mode
1… 12 115 5
BMS
address
+ chan-
nel
*
No answer 0 115 255 255
Acknowledgement 0 115
data
type
value