Bend-Tech Dragon A400 Скачать руководство пользователя страница 6

Страница: 6 / 44

Bend-Tech Dragon A400

Assembly Manual

Limited Warranty

Covering Bend-Tech Dragon

Bend-Tech LLC provides a limited warranty on all new Dragon machines that are manufactured

directly or under license by Bend-Tech LLC, and sold by Bend-Tech LLC or its approved

distributors.

Warranty Coverage

Each Bend-Tech Dragon machine is warrantied by the manufacturer against defects in material

workmanship for 12-months. The warranty period commences upon delivery of the Dragon

machine to the customer’s facility.

Repair or Replacement Only

The Manufacturer’s sole liability, and the Customer’s exclusive remedy under this warranty

shall be limited to repairing or replacing the defective part. Repair or replacement of parts

is at the sole discretion of the manufacturer. The Customer is responsible for warranty parts

installation. Bend-Tech does not provide warranty service labor.

Limits

This warranty does not cover components subject to wear due to normal use of the machine

such as belts, lights, tooling etc. This warranty is void if Bend-Tech LLC has determined any

failure is the result of mishandling, abuse, misuse, improper installation, improper storage,

improper maintenance or unauthorized modification of the machine. The warranty does not

cover damage due to natural disasters, fire, flood or other external factors. The warranty may

become void or limited in the event that hardware changes or adaptations are made to the

machine.

Software

The standard 2-year software maintenance plan is included with the purchase of a Dragon.

Before the 2-year maintenance plan has expired, the customer may purchase an extended

maintenance plan. The maintenance plan and extended maintenance plans will ensure the

customer always has the newest version of Dragon Software. The maintenance plan is critical

to keeping Dragon software updated with the newest capabilities possible, and is critical to the

servicing of the machine. Bend-Tech LLC will contact the Customer regarding updates to the

maintenance plan within 1-month of expiration. Contact Bend-Tech Support to ensure software

is up to date:

[email protected]

Содержание Dragon A400













































Результаты поиска

Содержание Dragon A400

Отзывы:

Похожие инструкции для Dragon A400

Бренды по названию

Популярные бренды

Bend-Tech Dragon A400, Инструкция по сборке

Результаты поиска

Содержание Dragon A400

Отзывы:

Похожие инструкции для Dragon A400

Бренды по названию

Популярные бренды