Bend-Tech Dragon A400, Инструкция по сборке

Страница: 29 / 44

29
Bend-Tech Dragon A400
Assembly Manual
Assembling the Dragon
03
The Parts Catcher, also called the Beak, prevents parts that have been cut by the machine
from falling to the ground, and possibly being damaged or causing injury. It is assembled from
three sections, the catcher, leg, and parts bin.
The catcher is placed on end, inside the crate, alongside the head of the machine. This part
of the assembly should have been removed from the crate prior to moving the head of the
machine. Before installing the catcher ensure the last remaining Support Leg is fitted with
Swivel Levelers.
Place the catcher at the front of the machine and attach it to the head using the 1 1/2 in. bolts
from Hardware Bag No. 2 and tighten with a 9/16 in. socket. Machines equipped with a standard
gate require 4 bolts per side, while machines equipped with a powered gate only require 3
bolts per side. The top bolts nearest the gate are not installed. Once secured to the head, slide
the Support Leg under the other end of the catcher. Secure the Support Leg with the 5/8 in.
long Allen head screws from Hardware Bag No. 2, and tighten with a 5/16 in. Allen wrench.
Place the parts bin just in front of the gate in the provided space. The parts bin can be found in
the Miscellaneous Box.
Note
Water can be added to the Parts Bin to help cool drop parts during production.
Important
Shorter machines will have a different configuration of beams and racks. Use the
numbers on the beams, racks, and other components to assemble the machine
in the correct order.