Bend-Tech Dragon A400, Инструкция по сборке

Страница: 41 / 44

41
Bend-Tech Dragon A400
Assembly Manual
Torch
08
8.2 Install the Torch Wand
The Torch is mounted to the Toolhead
using two mounting collars. For initial
install, the Torch should only be mounted
in the top collar.
Loosen the adjustment screws in
the top collar using a 3/16 in. Allen
wrench. Slide the Torch into the collar
from above, with the tip of the Torch
pointing down.
When the ceramic body of the Torch
is nearly touching the bottom collar,
hold the Torch in place and tighten the
top collar securely by hand. Do not
install the Torch in the bottom collar at
this time.
This is in reference to the Hypertherm
Torch Wand, if a different Plasma Unit
and Torch are used, this setup may
differ.
Only secure the Torch
in the top collar
Tools Needed
• 3/16 in. Allen wrench