Bend-Tech Dragon A400, Инструкция по сборке

Страница: 31 / 44

31
Bend-Tech Dragon A400
Assembly Manual
Leveling and Alignment
04
4.2 Straightening the Dragon A400
Ensuring the Dragon A400 is straight is one of the most important steps in preparing the
machine for operation. Bend-Tech has found the simplest way to determine if the machine is
straight, is to use a length of string. The string used during assembly at the Bend-Tech facility
has been provided with the machine. Follow the instructions regarding its use to ensure the
machine is straight.
The machine will come with an Allen head cap screw pre-installed on the Support Leg at the
Head of the machine and on the rearmost Support Leg at the Tail of the machine. The string
has been provided in the Misc. Box.
4.2.1 Checking the Straightness
Hook the loops of the string around the Allen head cap screws at the front and rear of the
machine. Ensure the string is positioned just under the head of the Allen head cap screw.
With the string installed, verify it is even with the tops of the Allen head cap screws installed in
each of the Support Legs. The string should be flush with the top of each fastener along the
length of the machine, as pictured.
Support Leg at the
Tail of the machine
Support Leg at the
Head of the machine
The string should be
positioned just under the head
of the Allen head cap screw.
String
Allen head screws attaching
the Support Legs to the Rails.