Bend-Tech Dragon A400, Инструкция по сборке

Страница: 17 / 44

17
Bend-Tech Dragon A400
Assembly Manual
Assembling the Dragon
03
3.1 Shipping Crate
The Dragon A400 is shipped from the Bend-Tech manufacturing facility in a custom-fabricated
shipping crate. This crate features a steel reinforced floor and is fully-enclosed to ensure
the protection of the Dragon A400 during shipping. The Dragon A400 machine is completely
secured within the crate for shipping purposes. Components may be bolted to the crate, shrink
wrapped, and secured with plastic or metal banding. The order in which components are
removed from the crate is important in executing proper assembly of the machine. For best
results in assembling the Dragon A400, carefully follow the steps outlined in this Assembly
Manual.
3.1.1 Dragon A400 Shop Position
Before beginning assembly, ensure there is adequate space to accommodate the machine on
the shop floor. Plan on reserving a minimum of 32-feet for the full length machine, more room
will be needed if the material cooling system is installed.
3.1.2 Crate Disassembly
03
Assembling the Dragon
! Caution !
Enlist the help of additional personnel when removing components from the crate
and assembling the machine. A dropped crate component could cause injury to
bystanders or damage the machine. Crate sides are large and heavy and should
not be lifted without help.