BELGACOM Belgafax 180s, Руководство пользователя

Страница: 29 / 36

29
General information
The time and date flash on the display. You must check the time and date after a short power
failure. Confirm using
OK
.
Problems when faxing or printing
Faxes sent are of poor quality.
Change the resolution from RESOL.: STANDARD to
RESOL.: FINE or RESOL.: PHOTO .
Change the contrast.
Clean the scanner.
Test the device by making a copy of the document.
If the device is in order, the fax machine of the re-
cipient is defective.
The device produces black lines when sending or print-
ing. Clean the scanner and the document feed slot.
Copy is blank. Insert the documents face up into the document feeder.
Printing is interrupted. Paper or document jam, no paper or ink film. Follow
the instructions on the display and in the error report.
There could be a small pause after printing several pag-
es. The device continues printing automatically.
No printing Check if you have inserted clamped paper correctly.
The lever on the right hand side next to the paper
feeder must be folded backwards.
Documents are not properly fed. Clean the scanner.
Problems with the connection
The device rings once, remains silent for a short while
and starts ringing again. This is absolutely normal. The fax switch checks the
call after the first ring. If it is a voice call, the device
continues to ring.
No dial tone Check the installation of the device. Connect the tel-
ephone cable to the socket marked
LINE
. Insert the
telephone plug into your telephone connection socket.
Fax transmissions are constantly interrupted. Try to send the fax manually: Press
l
and dial the
number. If the recipient is using an answering machine,
wait until you hear a whistling tone. Press
o
.
It is possible that the recipient's machine is not ready
to receive.
You hear a whistling tone or silence in the handset. The call is a fax: Press
o
on the device. In addition,
press
*5
on the telephone. Hang up.
No fax reception Using function 51, set the number of rings (see page
21).
You cannot simultaneously use the PhoneMail function
and receive faxes (see page 23).