BELGACOM Belgafax 180s, Руководство пользователя

Страница: 25 / 36

25
10 Service
Disruptions
Changing the ink film
Original Consumable Material
Instructions on the Packaging
Introduction to plug'n'print card
For receiving or copying documents, an ink film must
be inserted in your device. Your device is delivered
with an already inserted free ink film for a few test
pages. For this film, you do not require any
Plug’n’Print card (= chip card with information regard-
ing ink film capacity). For every next film that you
insert, you must load the capacity memory with the
included Plug’n’Print card.
1
Remove the paper from the paper feeder and take
the paper tray out of the device.
2
Open the device by lifting the panel using grip in
the centre and folding it down.
3
Grip the rear ink film roll at both the sides and
place it next to the front ink film roll.
4
Remove both the rolls from the device. The used
ink film cannot be reused.
5
Pull the used Plug’n’Print card out of the plug
socket on the left hand side next to the ink film
tray. The Plug’n’Print card cannot be reused.
6
Carefully remove the rubber bands from the new
ink film. Make sure that the film is not damaged!
7
Place the larger roll with the ink film in the rear
ink film tray. The blue gear wheel must be on the
right hand side.
Should disruptions occur, follow the instructions
on the display and on the error report.
Use only original consumable materials. These are
available from Belgacom. Other consumable ma-
terials could damage the machine or shorten its
service life.
Follow the instructions on the packaging of the
consumable materials.
Lock the cover of the machine completely into
place when opening the machine. You could
be injured if the cover falls while you are
working on the machine.
Consider data protection issues when disposing
of used ink films.