BELGACOM Belgafax 180s, Руководство пользователя

Страница: 26 / 36

26
8
Place the smaller roll without film in the front tray.
The blue gear wheel must be on the right hand
side and the pin must be inserted in the depression
on the left hand side.
9 Break the chip card from the Plug’n’Print card. In-
sert the chip card in the plug socket on the left
hand side next to the ink film tray.
10 Turn the blue gear wheel forward to tension the
ink film. The ink film must not have any creases.
11 Close the device. Insert the paper tray in the open-
ing provided for it behind the paper feeder. Insert
paper again.
Checking the Ink Film Reserve
1
Press
OK
,
46
and
OK
.
2
The number of pages that can still be printed with
the ink film is shown on the display.
3
Press
j
to return to the starting mode.
If the ink film used up or if there is no ink film in
the machine, a message appears on the display.
Fixing a paper jam
1
Remove the paper from the paper feeder and take
the paper tray out of the device.
2 Open the device by lifting the panel using grip in
the centre and folding it down.
3
Carefully pull the paper out.
4
Turn the blue gear wheel forward to tension the
ink film. The ink film must not have any creases.
5
Close the device. Insert the paper tray in the open-
ing provided for it behind the paper feeder. Insert
paper again.
Lock the cover of the machine completely into
place when opening the machine. You could
be injured if the cover falls while you are
working on the machine.