BELGACOM Belgafax 180s, Руководство пользователя

Страница: 4 / 36

4
1 Installation guide
Package Contents
1 Device
‚
Device
2 Telephone handset
ƒ
Telephone handset
3 Spiral cable for telephone handset
„
Spiral cable for telephone handset
4 Paper Tray
…
Paper tray
5 Additional document holder
†
Additional document holder
6 Power Cord
‡
Power cord with plug
7 Telephone Cable
ˆ
Telephone cord
8 Telephone Plug
‰
Telephone plug
User Manual
User manual with installation guide (not depicted)
Verpackungsinhalt 180s · 180ts
Missing Package Contents
Opening the cover
Opening the cover
Pull down the cover for paper and document feeder
behind the panel.
Geräteklappe öffnen
Attaching paper tray
Attaching paper tray
If you just want to insert paper temporarily, fold the
paper support in the cover up (
A ). You can remove
the paper after receiving fax or copying and close the
cover again.
If you constantly require paper in the device, insert
the paper tray in the opening provided for it behind
the paper feed (
B
).
Papierhalter installieren
Inserting paper
Paper Format
Before you can receive or copy documents, you must
insert paper. Please use only suitable paper in the stand-
ard format
A4 (210 × 297 millimetre · preferably 80
g/m
2
). Observe the information in the technical data.
Paper
Preparing Paper
Loading paper Sagem
1 Fold open the lever on the right beside the paper
feed towards front.
2 Insert paper in the paper feeder. You can use the
paper support in the cover to load
up to 15 sheets
(A4 · 80 g/m²). In the paper tray you can insert
maximum 50 sheets
(A4 · 80 g/m2).
3
Fold open the lever on the right beside the paper
feed backward in order to enclose the paper.
Papier einlegen
If one of the parts is missing or damaged, please
contact Belgacom.
Separate the paper sheets by fanning them out, then
align them by tapping edge of the stack lightly
against a flat surface. This will prevent several sheets
of paper from being drawn in all at once.