Belden lumberg automation 934 878-001 Скачать руководство пользователя страница 11

Страница: 11 / 75

3 System Description

The LioN-P (Lumberg I/O-Network Power) module series includes standalone

field bus devices for decentralized use in tough industrial environments. The

devices feature easy handling of I/O data in a higher-level bus system. They

are especially suitable for use in machines and installations with a moderate

I/O concentration over separate assemblies.
The LioN-P I/O module series has a very rugged metal housing made of

die-cast zinc. The module electronics are fully protected from environmental

influences by the fully sealed housing. The modules have protection classes

IP65, IP67 (IP69 for modules with M12-L). The permissible temperature range

for the modules is -25 ° C to +70 °C. The module series is therefore ideally

suited for direct field service in a tough industrial environment.
Despite the sturdy construction, the module series has compact dimensions

and a low weight.
The integrated 2-port Ethernet switch of the modules allows a bus or star

topology to be set up for the PROFINET I/O network. The implemented Media

Redundancy Protocol (MRP) enables the design of a highly available network

infrastructure.
The modules support the Ethernet network protocol SNMP (Simple Network

Management Protocol). The network management information is displayed

according to MIB-II (Management Information Base), which is defined in RFC

1213.
The LioN-P module series consists of four types of modules with different I/O

functionality. Modules with 16 digital inputs (16 DI), 16 digital outputs (16 DO),

8 digital inputs / 8 digital outputs (8DI/8DO) or 16 universal inputs/outputs

(16DI/DO) are available. The output current is 2 A per channel. The output

power circuits are electrically isolated (with exception of 16DI/DO) from the

rest of the network and the sensor electronics.
The modules with output functionality feature a failsafe function. During the

configuration of these modules, the behavior of each output channel can be

adjusted in case of interruption or loss of communication.

Technical Manual LioN-P PROFINET

Version 2.0 10/2017

Содержание lumberg automation 934 878-001












































































Результаты поиска

Содержание lumberg automation 934 878-001

Отзывы:

Похожие инструкции для lumberg automation 934 878-001

Бренды по названию

Популярные бренды

Belden lumberg automation 934 878-001, Техническое руководство

Результаты поиска

Содержание lumberg automation 934 878-001

Отзывы:

Похожие инструкции для lumberg automation 934 878-001

Бренды по названию

Популярные бренды