Configuration
4.8 NAT Configuration
4.8.1 Examples of NAT Configuration
Example 1: IPv4 NAT Configuration with Single Device Connected
It is important to mark the
Send all remaining incoming packets to default server
check box
for this configuration. The IP address in this example is the address of the device behind the
router. The default gateway of the devices in the subnetwork connected to router is the same
IP address as displayed in the
Default Server IPv4 Address
field. The connected device replies
if a PING is sent to the IP address of the SIM card.
Figure 31: Topology for NAT Configuration Example 1
Figure 32: NAT Configuration for Example 1
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
67
