Basic Information
1 Basic Information
1.1 Configuration
Configuring SmartFlex routers is made easy by name and password protected web interface.
The interface provides detailed statistics about router activities, signal strength, system logs
and more. The router supports both
and
protocols, the creation of secure VPN
tunnels using technologies
and
. The router also supports
, control by SMS, backup of primary connection, multiple
WANs,
authentication on Ethernet and many other functions.
Additional diagnostic features designed to ensure continuous communication include auto-
matic inspection of Mobile WAN connections, an automatic restart feature in case a connection
is lost, and a hardware watchdog that monitors the status of the router. Using a start up script
window, users can insert Linux scripts for various actions. Users may insert multiple scripts
and the router can switch between configurations as needed. Examples would include using
SMS or checking the status of the binary input. These routers can automatically update their
configurations and firmware from a central server, allowing for mass reconfiguration of multiple
routers at the same time.
1.2 Configuration Options
Routers can be configured via web browser or Secure Shell (
). Configuration via Web
Browser is described in this manual. Commands and scripts applicable in configuration using
are described in the "Commands and Scripts" application note. You can download the
PDF on the Internet at:
https://www.doc.hirschmann.com
. Technical parameters and a full
description of the router can be found in the "Installation" user manual. You can download the
PDF on the Internet at:
https://www.doc.hirschmann.com
1.2.1 Valid Characters for Web Interface
If the router is configured through the web interface, avoid entering of forbidden characters
into any of input form (not just for password). Forbidden characters can by written into a form,
but they will be deleted during data storing.
Valid
characters are:
0-9 a-z A-Z * , + - . / : = ? ! # % @ [ ] _ { } ~
Forbidden
characters are:
“ $ & ’ ( ) ; < > \ ^ ‘ | "space"
1.3 IPv6 Support
There is independent IPv4 and IPv6 dual stack configuration implemented in the router’s
firmware. This means that you can configure traffic through both IP protocols independently
and both are supported. Additional EUI-64 IPv6 addresses of network interfaces are gener-
ated automatically by standard methods. There is a NAT64 internal gateway network interface
for automatic translation between IPv6 and IPv4 (see Chapter
for more information). This
gateway works together with DNS64 seamlessly (for domain names translation).
12
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
