Status
3.3 Network Status
3.3 Network Status
To view information about the interfaces and the routing table, open the
Network
item in
the
Status
menu. The upper part of the window displays detailed information about the active
interfaces only:
Interface
Description
eth0, eth1
Firs and second network (Ethernet) interfaces
lo
Local loopback interface
nat64
Network interface of internal translator gateway between IPv6 and IPv4
addresses.
usb0
Active PPP connection to the mobile network – wireless module is con-
nected via USB interface.
ppp0
PPP interface (e.g. PPPoE tunnel)
tun0
OpenVPN tunnel interface
ipsec0
IPSec tunnel interface
gre1
GRE tunnel interface
Table 8: Description of Interfaces in Network Status
The following information can be displayed at every network interface:
Item
Description
HWaddr
Hardware (unique, MAC) address of a network interface.
inet addr
IPv4 address of interface
inet6 addr
IPv6 address of interface. There can be more of them for single network
interface.
P-t-P
IP address of the opposite end (in case of point-to-point connection).
Bcast
Broadcast address
Mask
Mask of network
MTU
Maximum packet size that the equipment is able to transmit.
Metric
Number of routers the packet must go through.
RX
•
packets
– received packets
•
errors
– number of errors
•
dropped
– dropped packets
•
overruns
– incoming packets lost because of overload.
•
frame
– wrong incoming packets because of incorrect packet
size.
Continued on next page
22
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
