Configuration
4.8 NAT Configuration
Continued from previous page
Item
Description
Masquerade outgoing packets
Activates/deactivates the network address tran-
slation function.
Table 31: Remote Access Configuration
Enable remote HTTP access on port
activates
the redirect from HTTP to HTTPS proto-
col only
. The router doesn’t allow unsecured HTTP protocol to access the web configura-
tion. To access the web configuration, always check the
Enable remote HTTPS access on
port
item. Never enable the HTTP item only to access the web configuration from the In-
ternet (configuration would not be accessible from the Internet). Always check the HTTPS
item or HTTPS and HTTP items together (to set the redirect from HTTP).
Use the following parameters to set the routing of incoming data from the WAN (Mobile WAN)
to a connected computer.
Item
Description
Send all remaining incoming
packets to default server
Activates/deactivates forwarding unmatched incoming
packets to the default server. The prerequisite for the
function is that you specify a default server in the
De-
fault Server IPv4/IPv6 Address
field. The router can for-
ward incoming data from a GPRS to a computer with
the assigned IP address.
Default Server IP Address
In
IPv4 NAT Configuration
only. The IPv4 address.
Default Server IPv6 Address
In
IPv6 NAT Configuration
only. The IPv6 address.
Table 32: Configuration of Send all incoming packets to server
66
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
