Configuration
4.14 Services
Continued from previous page
AT Command
Description
AT+CSCS
Selects the character set
AT+CSQ
Returns the signal strength of the registered network
AT+GMI
Returns the manufacturer specific identity
AT+GMM
Returns the manufacturer specific model identity
AT+GMR
Returns the manufacturer specific model revision identity
AT+GSN
Returns the product serial number
ATE
Determines whether or not the device echoes characters
ATI
Transmits the manufacturer specific information about the device
Table 56: List of AT Commands
A detailed description and examples of these AT commands can be found in the "AT Com-
mands" application note. You can download the PDF on the Internet at:
Sending SMS from Router
There are more ways how to send your own SMS from the router:
•
Using AT-SMS protocol described above – if you establish a connection to the router using
a serial interface or Ethernet (TCP), then you can use AT commands to send and manage
SMS messages. See "AT Commands" application note. You can download the PDF on
the Internet at:
https://www.doc.hirschmann.com
•
Using HTTP POST method for a remote execution, calling CGI scripts in the router. For
more details and examples, see the "Commands and Scripts" application note. You can
download the PDF on the Internet at:
https://www.doc.hirschmann.com
•
From Web interface of the router, in
Administration
section,
Send SMS
item, see Chapter
•
Using
gsmsms
command e.g. in terminal when connected to the router via SSH, see the
"Commands and Scripts" application note. You can download the PDF on the Internet at:
https://www.doc.hirschmann.com
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
103
