Belden HIRSCHMANN MACH 1040 Series, Руководство пользователя

Страница: 9 / 52

MACH 1040
Release 02 03/2013
9

Qualification requirements for personnel
Qualified personnel as understood in this manual and the warning signs,
are persons who are familiar with the setup, assembly, startup, and
operation of this product and are appropriately qualified for their job. This
includes, for example, those persons who have been:
 trained or directed or authorized to switch on and off, to ground and to
label power circuits and devices or systems in accordance with current
safety engineering standards;
 trained or directed in the care and use of appropriate safety equipment
in accordance with the current standards of safety engineering;
 trained in providing first aid.

General safety instructions
Electricity is used to operate this equipment. Comply with every detail of
the safety requirements specified in the operating instructions regarding
the voltages to apply.
Non-observance of these safety instructions can therefore cause material
damage and/or injuries.

Only appropriately qualified personnel should work on this device or in
its vicinity. These personnel must be thoroughly familiar with the
warnings and maintenance procedures in accordance with this
operating manual.

The proper and safe operation of this device depends on proper
handling during transport, proper storage and assembly, and
conscientious operation and maintenance procedures.

Never start operation with damaged components.

Only use the devices in accordance with this manual. In particular,
observe the warnings and safety-related information.

Any work that may be required on the electrical installation may only
be carried out by personnel trained for this purpose.

Please note that products recommended as accessories may have
characteristics that do not fully correspond to those of the
corresponding product. This may limit their possible usage in the
overall system.
Note: LED or LASER components in compliance with IEC 60825-1
(2007):
CLASS 1 LASER PRODUCT
CLASS 1 LED PRODUCT