Belden HIRSCHMANN MACH 1040 Series, Руководство пользователя

Страница: 34 / 52

34
MACH 1040
Release 02 03/2013
Note: Make sure that the LH ports are only connected with LH ports, SM
ports are only connected with SM ports, and MM ports only with MM ports.

1 Gbit/s fiber optic connection
1 GBit/s fiber optic ports (SFP slot) enable the connection of terminal
devices or independent network segments in compliance with the IEEE
802.3-2000 (ISO/IEC 8802-3:2000) 1000BASE-SX or 1000BASE-LX
standards. These ports support:
 Autonegotiation
 Full duplex mode
Default settings: autonegotiation
Note: Make sure that the LH ports are only connected with LH ports, SX
ports are only connected with SX ports, and LX ports only with LX ports.
2.2 Display elements
After the operating voltage is set up, the software starts and initializes itself.
Afterwards, the device performs a self-test. During this process, various
LEDs light up.
The process takes around 15 seconds.
Figure 14: Display elements for MAR1040 and MAR1042
1 - Device status display elements
2 - Port status display elements
Aufkleber MAC-Adresse
1
2
3
4
5
6
7
8
9
10
11
12
V.24 USB
P
FAULT
Sb R1
R2
RM
MAR1040
1
2 2 2 2