GUIDE TO INSTALLATION AND OPERATION
MDX-3901 |
3
Electromagnetic Compatibility
This equipment has been tested for verification of compliance with FCC Part 15, Subpart B requirements for
Class A digital devices.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
This equipment has been tested and found to comply with the requirements of the EMC directive 2004/108/CE:
EN 55022 Class A radiated and conducted emissions
EN 55024 Immunity of Information Technology Equipment
EN 61000-3-2 Harmonic current injection
EN 61000-3-3 Limitation of voltage changes, voltage fluctuations and flicker
EN 61000-4-2 Electrostatic discharge immunity
EN 61000-4-3 Radiated electromagnetic field immunity
– radio frequencies
EN 61000-4-4 Electrical fast transient immunity
EN 61000-4-5 Surge immunity
EN 61000-4-11 Voltage dips, short interruptions and voltage variations immunity
