GUIDE TO INSTALLATION AND OPERATION
24
| MDX-3901
5.5.3 SRC tab
This tab is available in embedder mode only.
Each of the rear panel AES inputs is provided with a sample
rate converter that will convert the sample rate of the AES
input to match and synchronize the sample rate of the audio
data embedded in the incoming SDI stream.
Each converter will be automatically bypassed if the detected
audio type is other than PCM.
Each converter can be manually bypassed (set pulldown to
OFF) if the incoming digital audio is already synchronized to
the incoming SDI signal. In this case, the processing delay
will be reduced by 1 ms.
5.5.4 Selector tab
Group Detected
Status indicators turn green when audio groups 1, 2, 3 or 4
are detected in the incoming signal. The Group Detected
warning color can be configured by the user in the Alarm
Config panel (
Discrete AES Channels (embedder mode only)
Status indicators turn green when an AES signal is detected
on the corresponding discrete AES input.
MADI Detected (embedder mode only)
Shows the current number of available channels on the MADI
input.
CH1 to CH16 Inputs Select
An input shuffler allows any combination of the input
channels. The pulldown labeling depends on the MDX-
3901’s
operating mode.
In embedder mode, use the 16 pulldowns to select an
Input in the range of AES channel 1 to 16 or a MADI
channel 1 to 64.
In de-embedder mode, use the 16 pulldowns to select a
signal in the range of Group 1 Channel 1 to Group 4 channel 4.
Figure 5.7 Audio Processing panels, SRC tab;
Embedder mode only
Figure 5.8 Audio Processing panels, Selector tab