GUIDE TO INSTALLATION AND OPERATION
MDX-3901 |
13
Fiber I/O Cage
– Fiber-optic input and outputs
Rear panels whose part number ends in
–F incorporate a fiber optic interface. The interface consists of two parts:
A socket on the rear panel into which an optional SFP interface module is plugged.
An optional SFP (Small Form-factor Pluggable) module into which the optical fibers are plugged, and which
incorporates the optical/electrical interface.
The optical fibers must be terminated in an LC connector.
– Installing the Optical Interface
for instructions on installing and removing the SFP interface module, and
for plugging and unplugging the LC-terminated fibers.
The SFP modules supported by the MDX-3901 are:
SFP Modules
Description
SFP-U-R-LC
12G Single Rx Fiber with LC/PC connector
SFP-U-RT-S13-LC
12G Dual Rx/Tx Fiber 1310 nm with LC/PC connector
SFP-U-T-S13-LC
12G Single Tx Fiber 1310 nm with LC/PC connector
SFP-U-TT-S13S13-LC
12G Dual Tx Fiber 1310 nm with LC/PC connector
SFP-R-LC
3G Single Rx Fiber with LC/PC connector
SFP-RT-S13-LC
3G Dual Rx/Tx Fiber 1310 nm with LC/PC connector
SFP-T-S13-LC
3G Single Tx Fiber at 1310 nm with LC/PC connector
SFP-TT-S13S13-LC
3G Dual Tx Fiber at 1310 nm with LC/PC connector
