Belarus 1523, Руководство по эксплуатации

Страница: 190 / 312

BELARUS- 1523/1523В /1523.3 /1523В.3 Подготовка трактора к работе
179
STOPPING THE TRACTOR
To stop the tractor, proceed as follows:
• lower engine crankshaft rotational
speed;
• step on the clutch pedal as far as it will
go;
• set the gear-shift lever and the range-
shift lever into their neutral position;
• release the clutch pedal;
• stop the tractor using service brakes;
• apply the parking.
ATTENTION! To stop the tractor in an
emergency situation, step sharply on
both clutch and brake pedals.
Stopping the engine
IMPORTANT! Prior to stopping the
engine, lower the attached agricultural
implement on the ground and let the
engine run at 1000 rpm for 3...5 min.;
this allows the diesel coolant tempera-
ture to be reduced.
To stop the engine:
• put the fuel feed control lever to the
rearmost position (corresponding to
engine minimum idling rotational
speed);
• pull the engine stop handle as far as it
will go and hold it in this position until
the engine fully stops;
• disengage the PTO;
• put all the distributor-valve handles to
the neutral position;
• lower the mounted machine onto the
ground;
•
place the SB switch to its OFF position
to avoid the discharge of the storage
batteries.