BAIS-T™ CONFIGURATOR MODULE
1MANUL051
Belanger , Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681
23
Programming
Edit Pack Names (Edit Package Names), (Screen 3)
You will encounter 15 screens in this area. This is where you will setup your available “Packages” i.e. Base
Wash (good), Super Wash (better), Ultra Wash (best), etc. You can have up to 15 different packages
programmed in at any time (see Operating Keypad Overlay). The actual grouping of the packages will be done
in a different screen. Here you will just name them.
From the 11 screens described earlier in this document, use the “ARROW” keys to select the “#3” screen. This
is the “Edit Pack Names” screen (shown below).
Press the <ENTER> key. The following screen will appear:
You can go directly to any package number by entering the desired number in the package number cell and
pressing <ENTER>.
Here you will enter the desired names and prices of the individual packages. The “SELECT” key moves the cursor
through the available fields on the screen.
•
In the “Name” field, type in the name in which you would like the package to be called (up to 15 characters).
Always try to use names that make since and describe what a given package does.
•
In the “Price” field, enter the price of a package. It will be necessary to enter the decimal point.
Use the image below as an example:
Press the <SAVE> key to move to the next “Package”. Follow the above directions until you have
programmed all of the desired Package Names.
Make sure you SAVE after each program has been completed. Review you programming frequently.
Note:
The BAIS-T™ system has the ability to run in “Fleet Mode”. See the appropriate chapter
for details. In Fleet Mode the system will run Package #1 for every vehicle. It is advised to
program your best wash as Package #1 as you can always manually turn off functions if
the BaiStation™ is down.
SET PACKAGE NAME
: 01
Name
: BASE WASH
Price
: 0000.00
<Enter><Selct><Save>
SET PACKAGE NAME
: 01
Name
: BASE WASH
Price
: 0003.50
<Enter><Selct><Save>
CAR WASH SET-UP
:
3. Edit Pack Names
<Enter><Menu><Up/Dn>
Screen Key:
•
Line 2: Enter desired Package name
•
Line 3: Enter desired Package price
Screen Key:
•
Line 3: Entering the number 3.50 = $3.50
