Beka Hospitec AVERO Phoenix, Руководство по эксплуатации

Страница: 10 / 35

Transport
Operating manual AVERO Phoenix V2.1 E Page 10 of 35
CAUTION
In case of unusual noises, damages or malfunctions,
the product no longer must be used.
5. Transport
Transport the bath tub towards the planned place of installation. Use a lift truck or
similar for the transport. Put down the bath tub in a safe and stable manner, so that it
cannot tilt.
5.1 Unpacking the product
To remove the packaging materials, you will need a cutter knife.
NOTE
Take care so as to not damage the product when using
tools.
Do not cut with the cutter in the cardboard.
5.1.1 Removing the cardboard
Proceed in the following way to remove the cardboard:
•
Cut the strap with the cutter knife
•
Remove the strap
•
Lift the cardboard up to remove it and put it aside
5.1.2 Loosening the product from the pallet
The bath tub is on both sides strapped to the pallet.
Proceed in the following way to loosen the product from the pallet:
•
Unscrew the fixing screws of the straps
•
Remove the straps
•
Lift the bath tub off the pallet.
•
Install the bath tub at the intended location of use.
•
Remove the bubble wrap and the stretch film
After all fixations have been removed, you can lift the bath tub from the pallet (2
persons).
The accessories for your bath tub are included in the supplied cardboard box.