Behncke Control 1.3 Скачать руководство пользователя страница 12

Страница: 12 / 60

Control 1.3 Swimming Pool Control Unit

Safety



The system must not be operated without the protective housings provided on the individual

components

2.6.3

Compliance with the Degree of Protection

After carrying out work on the BEHNCKE Control 1.3, moisture may penetrate into the device if the housing

or individual cable glands are not closed properly, ensuring that there is a reliable seal. This can lead to

damage or destruction of the control unit or result in malfunctions.



Ensure that there is a reliable seal after carrying out any work on the device.

Dangers due to Structural Modifications and Spare Parts

Structural modifications can affect the operational safety. The control unit must therefore only be rebuilt and

modified in consultation with the manufacturer. No components must be removed, in particular safety

devices.

Only BEHNCKE spare parts and accessories must be used.

Any accessories must not endanger the safety of the system.

Safety Measures at the Installation Location

The control unit must be mounted securely on the wall, in a control cabinet or on a mounting plate and is

not suitable for use in constant sunlight.

Make sure that the operating temperature of 40°C is not exceeded.

Operate the control unit only when all safety devices are fully functional.

The control unit or the surrounding area may be damaged if this information is not observed.

No explosive atmosphere is permitted in the installation area.

The installation area must not be colder than 5°C during operation and when carrying out maintenance,

commissioning, cleaning and repair work.

CAUTION!

Check the control unit and connections for visible damage and to ensure they are

functioning

at least once a week

Disconnect the control unit from the power supply in the case of visible damage and

consult a qualified electrician.

Содержание Control 1.3





























































Результаты поиска

Содержание Control 1.3

Отзывы:

Похожие инструкции для Control 1.3

Бренды по названию

Популярные бренды

Behncke Control 1.3, Руководство по эксплуатации

Результаты поиска

Содержание Control 1.3

Отзывы:

Похожие инструкции для Control 1.3

Бренды по названию

Популярные бренды