Behncke Control 1.3, Руководство по эксплуатации

Страница: 21 / 60

Control 1.3 Swimming Pool Control Unit
Installation and Commissioning
19
Installation and Commissioning
Safety Instructions for Installation and Initial Commissioning
The installation and initial commissioning should only be carried out by a systems
mechanic or specialist!

Work on the electrical equipment must only be carried out by qualified electricians.

The electrical equipment on the system must be checked at regular intervals.

Loose connections and damaged components must be secured immediately or
replaced.
WARNING!
Risk of fatal injury from an improper installation and initial commissioning!
Errors during the installation can lead to life-threatening situations or cause substantial
property damage.

Do not climb on the control unit or its cables.

Maintenance and cleaning work must only be carried out by specialists when the
control unit is switched off, disconnected and has cooled down.
Installation
5.2.1 Requirements at the Installation Location

The foundations and the mounting location must be designed for the anticipated static and dynamic
loads.

The area must be frost-proof.

The area must be covered and dry.

The area must not have an aggressive atmosphere.

The area must have a non-explosive atmosphere.

Condensation can damage the control unit, make sure that the area is well ventilated.

The area must be equipped with sufficient lighting (at least 200lx)

Ensure easy access for customer service work.

Observe the minimum installation dimensions in accordance with the installation plan.

The ambient temperature must be b5 and +50°C

The humidity must be below 90%
Basic Information on the Installation
The control unit must be fixed to the wall / a mounting plate. Secure the control unit against vibrations so
that the mounting cannot work loose.