Behncke Control 1.3, Руководство по эксплуатации

Страница: 11 / 60

Control 1.3 Swimming Pool Control Unit
Safety
9
Sources of Danger and Residual Risks
The operating instructions for the individual built-in components and peripherals must be consulted for all
sources of danger and residual risks.
Danger!
The electrical equipment on the system is under high voltage. You should therefore
observe the following information:

Work on the electrical equipment must only be carried out by qualified electricians.

The electrical equipment on the system must be checked at regular intervals.

Loose connections and damaged components must be replaced immediately or
secured.
Switch off the power supply to the system before carrying out any maintenance
work!
There is a risk of death or injury to the user and a risk of damage to other material
assets.
Never remove safety devices or disable them by making changes to the control unit!
2.6.1 Delimitation of the Respective Machine
The inspection ends at the control unit housing. All other inspections must be made by the commissioning
engineer / operator / user.
2.6.2 Electrical Contact
There is an increased risk of electric shock due to the humid environment when working on electrical
equipment on the system. Similarly, improper installation of the electrical protective conductor can lead to
an electric shock, for example, through oxidation or a cable break.

Observe the VDE regulations as well as the regulations of the power supply company.

Construct swimming pools and their protective areas in accordance with DIN VDE 0100-702

All work on the electrical equipment must only be carried out by the appropriately qualified
electricians.

Disconnect the power supply 30 minutes before carrying out work on the system Attach a warning
sign :
 “Do not switch on! Work is being carried out on the system.”

Check at regular intervals that the electrical system is in an orderly condition