Behncke Control 1.3, Руководство по эксплуатации

Страница: 10 / 60

Control 1.3 Swimming Pool Control Unit
Safety
8
being carried out on the control unit.”

Please note when touching electrical parts that they may still permit capacitors to
discharge.

Do not bypass or deactivate any fuses.

Sparks may occur on the electrical connections. The control unit must therefore not be
installed or operated in an explosive atmosphere.

The electrical connection must only be carried out by qualified electricians.

The respective national regulations relating to electrical installations as well as the requirements of the
local energy supply companies must be observed.

The control unit should only be installed in control cabinets and housings specified or supplied by
Behncke.

Installing the unit in a salt-laden atmosphere (e.g. brine bath or near the sea) can lead to corrosion on
the electrical contacts.

Voltage fluctuations interfere with the operation and may damage the device.

Cables for the transmission of data and signals must not be laid together with other live cables.

The device must be disconnected at the backup fuse before opening the terminal box cover.
Unexpected Start-up
DANGER!
Risk of fatal injury from an unexpected start-up
The BEHNCKE Control 1.3 works as soon as there is voltage at the power input and the
individual functions are called up immediately.

Secure the control unit against unauthorised access.

Turn on the power to the control unit only when all the preparations for a safe start-up
and safe operation have been completed.
Safety Devices
The following safety devices must be installed by the operator:
A 4-pin emergency stop switch with a backup fuse as well as a 30 mA residual current circuit breaker must
be connected on-site upstream of the device!
The following safety notices are installed:
DANGER!
Risk of fatal injury from electric current!
The warning signs on electrical equipment indicate dangers caused by electric current.