IMPORTANT INSTRUCTIONS
BEDJET USER OPERATING MANUAL
Revision 1.0
www.bedjet.com
P a g e | 18
Tips for Enjoyment
Here are some wonderful tips to help you better enjoy the BedJet:
Air flow around your body:
1) If you enjoy the feeling of air movement around your body, place your top sheet directly over the Air
Nozzle so that it blows directly into your sleeping layer. This is particularly good for people who
have body moisture or night sweat issues in bed.
2) If you don’t enjoy the feeling of air movement around your body, place your top sheet UNDER the
Air Nozzle, and then another layer of air-tight bedding (sheet or comforter) over the Air Nozzle to
create a sandwich layer for the air to flow (not in your sleep layer). This works best for cooling
mode and creates a wonderfully cold layer on top of you that pulls heat out of the bed but without
the feeling of a breeze around your body.
3) Expect the sheets to balloon upwards in Turbo-Heat mode, which puts out massive amounts of air.
In other modes, you may find the slight raising of the sheets from the air feels good, but if not, place
a pillow half in and half out of the sheets at the top of the bed. This will “unseal” your bedding from
the air build-up and allow it to deflate back down.
For those who love the heat and have chilly feet:
1) Try using the Turbo-Heat mode as a pre-heater just before you get into bed. Get in with as few
clothes on as you can and enjoy the cuddly warmth directly on your skin (and wiggle around).
2) While all modes have adjustable Air Flow, Turbo-Heat is intended to get as much heat into the bed
in as short and safe a period as possible, so why bother turning the Air Flow down?
3) Hate getting out of a hot shower on cold winter days? Dry off briefly, or don’t dry off at all – but in
either case, run into the bed, turn on Turbo-Heat mode, and enjoy the powerful dry heating luxury --
it’s like giant hair dryer for your whole body. Trust us on this one, it sounds silly but it feels amazing!
4) The highest settings of Normal Heat will become too warm for most people after some period of
time. Experiment with lower settings and work your way up to what feels comfortable. Sleep
science says that your body sleeps best when it’s allowed to cool down so we encourage the heating
for short term use while getting into bed and not for all night warming.
For those who want it cool:
1) BedJet cooling has a wide range of available Air Flows, to accommodate for different bedding types.
More isn’t always better – experiment with the full range of Air Flow to find the perfect settings for
your unique set of bedding. Depending on your bedding configuration, you can actually turn the Air
Flow up too high and reduce the feeling of cooling due to the bedding ballooning up too much.
