IMPORTANT INSTRUCTIONS
BEDJET USER OPERATING MANUAL
Revision 1.0
www.bedjet.com
P a g e | 10
BedJet Dual Zone Switch:
The BedJet Dual Zone switch sets the maximum
allowable air flow and power utilized by the BedJet
in any heat mode. In Turbo Heat Mode, the BedJet
can consume a large amount of power for an
electrical appliance (up to 1500 watts).
Any installation with two BedJet devices on the
same household AC branch circuit or two BedJet’s
on the same bed must have the Dual Zone Switch
set ON to LOW Power, in order not to exceed AC
circuit Amp capacity. The Dual Mode ON Low Power setting reduces the available airflow and
heating power by approximately 50% in the Turbo heat mode, and 20% in regular heat mode in
order that two BedJet’s being used simultaneously on the same AC bedroom circuit will not
exceed AC circuit capacity. This is still plenty of power to warm the bed quickly.
Installations where only one BedJet is used on the same household branch AC Circuit and one
BedJet device is installed on the bed should set the Dual Zone Switch OFF to HIGH power to
enjoy the full power heating comfort of the system.
WARNING:
Failure to comply with the correct Dual Zone Switch setting with
more than one BedJet installed on the same AC branch circuit may result in overloaded
electrical circuit, electrical hazard or personal injury. Never use more than one BedJet on the
same household AC circuit or same bed without setting Dual Zone switch to LOW Power.
