IMPORTANT INSTRUCTIONS
BEDJET USER OPERATING MANUAL
Revision 1.0
www.bedjet.com
P a g e | 14
Installation: Single Zone BedJet
Use the following instructions for a single zone BedJet installation. A single zone BedJet
installation is a single BedJet installed on any size bed, resulting in heating or cooling of the
entire bed as a single temperature zone. Settings on medium or low may allow partial sections
of the bed to be heated or cooled if desired (see Step #3). All required items and components
for the single zone installation are included in the BedJet box.
BedJet Installation Checklist:
Before installing BedJet under the Bed, assemble all parts and become familiar with BedJet
operation while the Status Display is still easily viewable:
1) Make sure battery is installed in remote control, the amber light on remote control
should turn on when any button is pressed.
2)
Adjust the BedJet Dual Mode Switch according to your installation type (see page 10).
THIS IS VERY IMPORTANT.
3) Determine optimal air nozzle location near the bottom of the bed per your own
personal heating and cooling zone preferences on the chart below. It’s good to
experiment with these to learn what works best for you:
Whole bed warming and
cooling, slightly favors
left side on low air
settings
Mostly left side of bed
warming and cooling
Mostly right side of bed
warming and cooling
Whole bed warming and
cooling, slightly favors
right side on low air
settings
