manualshive.com logo in svg

Beckhoff EPI3 Series, Документация

Поделиться
Скачать
Beckhoff EPI3 Series Скачать руководство пользователя страница 92

Commissioning/configuration of IO-Link master/device

EPI3xxx, ERI3xxx

92

Version: 1.2

5.3.9

Firmware update of the IO-Link device

Firmware update only possible with EtherCAT IO-Link master products

The firmware update of the IO-Link device is only possible with the EP6224-xxxx, EP6228-xxxx and
EL6224. A firmware update is not possible with the KL6224.

An update of the box firmware is currently supported via the EP622x-xxxx IO-Link master box and the
TwinCAT System Manager from version 2.11 R3 build 2248 or TwinCAT 3.1 build 4018.

The firmware update is performed directly via the IO-Link interface. To this end the box must be connected
to the EP622x-xxxx and in 

Operational 

state. The update is started in the 

Advanced 

dialog of the

corresponding IO-Link port (see the two figures below).

1. Select the EP622x-xxxx Box in the System Manager,

2. in the 

IO-Link 

tab, right click on

 

the

 

appropriate port

3. open the 

Settings

 tab,

4. select the 

Advanced

 button

5. Select IO-Link firmware files via the 

Download 

button (use the file extension *.efw).

The 

Firmware Update

 dialog is only displayed for supported Beckhoff IO-Link devices. Once the *.efw

file has been checked, the firmware update starts automatically. This process must not be interrupted!
After a successful update, the box is automatically restarted and therefore usually does not have to be
de-energized. Device-specific settings (Appl. -Specific Tag, Settings) will not be lost.

Fig. 82: IO-Link settings - download firmware update

Содержание EPI3 Series



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды