manualshive.com logo in svg

Beckhoff EPI3 Series, Документация

Поделиться
Скачать
Beckhoff EPI3 Series Скачать руководство пользователя страница 35

Commissioning/configuration of IO-Link master/device

EPI3xxx, ERI3xxx

35

Version: 1.2

Fig. 33: detected Ethernet devices

After confirmation with “OK” a device scan is suggested for all selected devices, see following figure.

Detecting/Scanning the EtherCAT devices

Online scan functionality

During a scan the master queries the identity information of the EtherCAT slaves from the slave
EEPROM. The name and revision are used for determining the type. The respective devices are lo-
cated in the stored ESI data and integrated in the configuration tree in the default state defined

there. 

If an EtherCAT device was created in the configuration (manually or through a scan), the I/O field can be
scanned for devices/slaves.

Fig. 34: scan query after automatic creation of an EtherCAT device

The configuration has been build and directly shifted into the online state (OPERATIONAL). The EtherCAT
system should then be in a functional cyclic state, as shown in the following figure.

Содержание EPI3 Series



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды