manualshive.com logo in svg

Beckhoff EPI3 Series, Документация

Поделиться
Скачать
Beckhoff EPI3 Series Скачать руководство пользователя страница 43

Commissioning/configuration of IO-Link master/device

EPI3xxx, ERI3xxx

43

Version: 1.2

Column

Description

Transition

Transition to which the request is sent. This can either be

• the transition from pre-operational to safe-operational (PS), or

• the transition from safe-operational to operational (SO).

If the transition is enclosed in "<>" (e.g. <PS>), the mailbox request is fixed and cannot be
modified or deleted by the user.

Protocol

Type of mailbox protocol

Index

Index of the object

Data

Date on which this object is to be downloaded.

Comment

Description of the request to be sent to the mailbox

Move Up

This button moves the selected request up by one position in the list.

Move Down

This button moves the selected request down by one position in the list.

New

This button adds a new mailbox download request to be sent during startup.

Delete

This button deletes the selected entry.

Edit

This button edits an existing request.

CoE - Online tab

The additional 

CoE - Online

 tab is displayed if the IO-Link master supports the 

CANopen over EtherCAT

(CoE) protocol. This dialog lists the content of the object list of the slave (SDO upload) and enables the user
to modify the content of an object from this list. Details for the objects of the individual IO-Link devices can
be found in the device-specific object descriptions.

Содержание EPI3 Series



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды