Beckhoff EL72 1-901 Series, Руководство пользователя

Страница: 120 / 263

Commissioning
EL72x1-901x 120 Version: 1.9
Start-up with the Drive Manager
• The terminal must already have been added manually under I/O devices or have been scanned in by
the system (see section " Configuration set-up in TwinCAT [
}
93] ")
• The terminal must already be integrated in the NC (see section " Integration in the NC configuration
[ } 115] ")
• Select the Configuration tab for the EL72x1-xxxx.
• Select the connected voltage under Power Management .
Fig. 147: Selecting the connected voltage
• You can subsequently scan or select the connected motor under Motor and Feedback . If you decide to
use automatic scanning, click on Scan motor and feedback . The electronic type plate of the AM81xx-
x2xx motor will then be read automatically. To do this it is necessary for automatic scanning of the
motor to be activated in the terminal (Index
0x8008 [ } 189] , MDP or Index 0x2018 [ } 217] , DS402)