Beckhoff CU8130-0240, Руководство пользователя

Страница: 34 / 57

Configuration
CU8130-0240 34 Version: 1.1
Setting or function Value range Default
value
Description
Combobox (task list) Available
task sched-
uler tasks
"UPS Sys-
tem Shut-
down Pro-
gram"
You cannot specify a command file that causes a
dialog box to appear, because dialog boxes that
require user input can impede a graceful system
shutdown. The command file must finish running in
30 seconds. A run time that is greater than 30
seconds threatens the capability of Windows to
complete a graceful system shutdown. Windows
Task Scheduler executes the shutdown task in
context of configured user account. The user account
under which the schedule service runs may require
specific file access permissions, user permissions
and drive mappings. If the configured user name and
password parameters match the currently logged-in
user, the task will run interactively (visible in the
foreground). For the system account the user name
can be written as "NT AUTHORITY\SYSTEM", a
password is not required. The system account has
full access to the local machine but has no
permissions on any other machines (or mapped
drives) across the Network. Further information can
be found in the Windows Task Scheduler
documentation.
New... - "UPS Sys-
tem Shut-
down Pro-
gram"
Creates new task scheduler task with default name:
"UPS System Shutdown Program". This command is
only available under XP operating system. The
command is only available if the default task is not
allready in the task list.
Please use the task scheduler dialog in the MMC
(Microsoft Management Console) to create new
shutdown tasks on Windows Vista or 7 systems.
Edit... - "UPS Sys-
tem Shut-
down Pro-
gram"
Displays options that you can configure for a selected
task scheduler task that will run before a system
shutdown action occurs. This command is only
available under XP operating system.
Please use the task scheduler dialog in the MMC
(Microsoft Management Console) to edit the task
configuration on Windows Vista or 7 systems.
Run... - "UPS Sys-
tem Shut-
down Pro-
gram"
Starts the selected task scheduler task for test
purposes. This command is only available under XP
operating system.
Please use the task scheduler dialog in the MMC
(Microsoft Management Console) to test and run the
task on Windows Vista or 7 systems.
Task Scheduler v1.0 (not
recommended) Disabled or
enabled
Disabled
(checkbox
not se-
lected)
Enables forced usage of XP task scheduler v1.0
interface on Windows Vista or 7 operating system.
The Task Scheduler v1.0 interface on Windows Vista
or 7 offers only limited functionality.
Finally, turn off the UPS Disabled or
enabled
Enabled
(checkbox is
selected)
If you have selected this option, the UPS will switch
the outputs off after the PC has been shut down, in
order to save the battery charge (Standard:
Selected).
Turn UPS off wait time [s] Depends on
hardware
(see table
below)
180 The PC must have properly shut down within this
time. An internal timer in the UPS measures the time
from when the OS began to shut down. Once this
time has elapsed, the UPS switches off its outputs in
order to save battery charge. Make sure that you
have not selected too short a time for this.