Installation and Operation
Becker Avionics
10
ACU6100
DV64440.03 Issue 09 November 2019
Disposal
The packaging material is inflammable, by burning toxic fumes may develop.
This product contains materials that fall under the special disposal regulation. We recommend the
disposal of such materials in accordance with the current environmental laws.
•
Dispose circuit boards by a technical waste dump which is approved to take on e.g.
electrolytic aluminium capacitors. Do under no circumstances dump the circuit boards with
normal waste dump.
Warranty Conditions
The device(s) may be installed on an aircraft only by an approved aeronautical
company (e.g. Part 145) which shall also examine the installation.
Any change made by the user excludes any liability on our part (excluding the work described in this
manual).
•
The device must not be opened.
•
Do not make any modifications to the device, except for those described in the manual.
•
Make connections to the inputs, outputs and interfaces only in the manner described in
the manual.
•
Install the devices according to the instructions.
We cannot give any guarantee for other methods.
Conditions of Utilization
With this device you bought a product which was manufactured and tested before delivery with the
utmost care.
Please take your time to read the instructions which you ought to follow closely during installation and
operation.
Otherwise all claims under the warranty will become void and a decreased service life or even
damages must be expected.
The user is responsible for protective covers and/or additional safety measures in
order to prevent damages to persons and electric accidents.
Additional Conditions of Utilization
Please refer to "Safety-Conscious Utilization", page 18.
Non-Warranty Clause
We checked the contents of this publication for compliance with the associated hard and software. We
can, however, not exclude discrepancies and do therefore not accept any liability for the exact
compliance. The information in this publication is regularly checked, necessary corrections will be part
of the subsequent publications.
