Becker Avionics
Installation and Operation
DV64440.03 Issue 09 November 2019
ACU6100
25
2
Installation
This manual must be available during performance of all tasks.
The installation of the device(s) depends on the type of aircraft and its equipment and therefore only
general information can be given in this section.
Any deviations from the instructions in this document are under own responsibility.
In this chapter you can read about:
2.1
Packaging, Transport, Storage ................................................................................................... 25
2.2
Device Assignment .................................................................................................................... 26
Scope of Delivery ............................................................................................................. 26
State of Delivery ............................................................................................................... 26
Additional Equipment ....................................................................................................... 26
Type Plate ........................................................................................................................ 27
Software/Firmware Status – Functionality ........................................................................ 28
2.3
Installation Requirements ........................................................................................................... 28
ACU6100 - Gravo Plate Installation ................................................................................. 29
ACU6100 - Laser Plate Installation .................................................................................. 30
2.4
Dimensions ................................................................................................................................ 31
ACU6100 ......................................................................................................................... 31
2.5
Connector Pin Assignments ....................................................................................................... 32
Connector P1 ................................................................................................................... 32
Connector P2 ................................................................................................................... 33
Address Coding................................................................................................................ 33
2.6
Aircraft Wiring ............................................................................................................................. 34
Electrical Bonding and Grounding .................................................................................... 34
ACU6100 - Power Supply Connections ........................................................................... 35
ACU6100 - CANbus and Device Address ........................................................................ 35
Wiring - 6x ACU6100, CANbus and Device Address ....................................................... 37
2.7
Configuration .............................................................................................................................. 39
2.8
Functions.................................................................................................................................... 39
Intercom Circuits .............................................................................................................. 39
Example: Intercom Extension for Passengers.................................................................. 39
Example: Intercom Extension for Ground Crew ............................................................... 40
Emergency Call (E-Call) ................................................................................................... 40
2.9
Selective Call ............................................................................................................................. 40
2.10
Post Installation Check ............................................................................................................... 41
Mechanical Installation and Wiring Check ........................................................................ 41
Power Supply ................................................................................................................... 41
Power On Check .............................................................................................................. 41
2.1 Packaging, Transport, Storage
Visually inspect the package contents for signs of transport damage.
The packaging material is inflammable, if it is disposed of improperly by burning,
toxic fumes may develop.
Keep the packaging material and use it in the case of a return shipment. Improper or faulty packaging
may lead to transport damages.
Make sure to transport the device always in a safe manner and with the aid of suitable lifting
equipment if necessary. Do never use the electric connections for lifting. Before the transport, a clean,
level surface should be prepared to put the device on. The electric connections may not be damaged
when placing the device.
First Device Checkup
•
Do a check for signs of damages.
•
Please make sure that the indications on the type plate agree with your purchase order.
•
Make sure that the equipment is complete ("Scope of Delivery", page 26).
