Becker ACU6100 series, Инструкция по установке и эксплуатации

Страница: 33 / 64

Becker Avionics
Installation and Operation
DV64440.03 Issue 09 November 2019 ACU6100 33
Connector P2
P2/Pin Signal name / Function Remarks
L Device Address Bit 0
M Device Address Bit 1
A Device Address Bit 2
B Device Address Bit 3
U Reset out
V Reset in
N GND
C
CAN1 in (HI)
D CAN1 in (LO)
P CAN1 in (shield)
E CAN1 out (HI)
F CAN1 out (LO)
R CAN1 out (shield)
G CAN2 in (HI)
H CAN2 in (LO)
S CAN2 in (shield)
J CAN2 out (HI)
K
CAN2 out (LO)
T CAN2 out (shield
Address Coding
•
Set the address coding for the control panels (ACU) on the CANbus by pin strapping of
pins L, M, A, B.
• For each control panel on the CANbus a unique address is necessary.